35MHz/2mv/20ns/雙通道/雙蹤
廠家: 日本建伍
尺寸: 26×18×37 cm
重量: 7 kg
* Vertical axis with wide bandwidth (35MHz -3dB) and high sensitivity (2mV/div , 1 div=9.5 mm).
* Single sweep function for one-Shot uace observation.
* Fix sync function for automatic synchronization of varied waveforms.
* The adoption of signal delay circuit permits observation of the rising characteristic of high speed pulses.
* Hold-off control system for stabilized synchronization of complex waveforms.
* Easy correction of horizontal trace angle with unique trace rotation system.
* The CRT has a rectangular with internal graticule. post deflection accelerator with domed mesh to eliminateparallax errors.
* Dotted line indicate 0%,10%,90% and of measur- ing lattice for measurement of rise time.
* changeover systems allows CH 1 amplifier to be used as X axis amplifier and CH2 amplifier as V axis amplifier.
* CHOP and ALT are interlocked with time base switch to permit automatic changeover. Observation during CHOPoperation is also possible.
* Auto free-run system enables the trace to be checked even at no-signal time.
* Sync coupling for AC. IF Rej. HF Rej. VIDEO and DC to provide stable synchronization.
* VIDEO-FRAME, VIDEO-LINE selection of VIDEO sync separation circuit is automatically effected by the in-terlocked time base switch.
* UNCAL lamp is ON when vertical sensitivity or sweep time is not being calibrated. TRIG lamp is ON during. trigger sweep.
* The adoption of ICs throughout circuitry provides highperformance and improved reliability.
